Commercial bag dispensers keep bag stock off the counter and within reach of the person who needs it. Wall mounting protects the roll from contamination, stops the pile of loose bags that builds up in every supply closet, and makes it obvious at a glance when a refill is due.
This collection holds general-purpose wall-mounted bag dispensers for exam rooms, labs, food prep areas and utility spaces, alongside the menstrual care disposal units we manufacture under our S.A.C. line. The bags and liners that load into them are stocked separately.
The clear-front bag dispensers we stock are made by Bowman, a US manufacturer we distribute. They are molded from PETG, a transparent rigid plastic, so staff can see remaining stock without opening anything.
Two-way keyholes on the back plate accept vertical or horizontal mounting, which matters when you are working around existing casework, a glove box holder or an outlet. The double unit measures 10.1 inches wide by 7.1 inches high by 3.95 inches deep and weighs just over a pound, so it mounts to drywall with standard anchors.
Eight configurations are stocked, priced between $30.00 and $120.00. Each carries a downloadable data sheet with item numbers and dimensions for submittal packages. Start with the single roll dispenser at $30.00 or the double at $59.00.
Single units hold one roll and suit low-turnover points such as a private office, a break room or a single exam bay. They also work as a second dispenser at a satellite location where a full double would sit half empty.
Double units hold two rolls. Load them with the same bag for longer intervals between refills, or with two sizes so staff can grab the right one without walking to a second station. In high-turnover rooms the double is usually the better buy, since the labor cost of a refill trip exceeds the price gap between the two.
Mount at working height near the point of use. A dispenser installed across the room from where bags get pulled will be ignored, and staff will go back to keeping a loose box on the counter. The same logic applies to glove dispensers and wipe dispensers mounted in the same rooms.
Bag dispensers are a small line item that quietly controls supply waste, which is why we included them in our roundup of essential janitorial supplies. In clinical and lab settings they also support the containment step covered in PPE waste segregation and containment.
Several products here belong to our S.A.C. menstrual disposal line, which we manufacture in the USA. These are stall-mounted units that hand users a sealed bag, and they take dedicated SB8836 boxes or SR9010 rolls.
If that is what you are specifying, our menstrual courtesy bag dispensers collection covers the formats in full, and the courtesy bags that load into them are stocked for standing orders. We made the case for in-stall bags in this breakdown of the maintenance math.
The clear roll dispensers take standard bag rolls sized to the unit, with single and double roll capacities. The S.A.C. menstrual units take dedicated SB8836 boxes or SR9010 rolls. Check the data sheet or send us your bag dimensions and we will confirm the fit against our trash bag and liner range.
Two-way keyhole slots on the back plate allow vertical or horizontal orientation on drywall, tile or casework with standard anchors. No plumbing or electrical work is involved, so a facilities tech can install a run of them in an afternoon.
The Bowman roll dispensers are built in the USA by Bowman, and our S.A.C. menstrual disposal units are manufactured by us in the USA. Country of origin appears on each product's data sheet for procurement files.
Yes. We ship case quantities, set up standing refill orders and support institutional and government purchasing. Send us room counts and we will size the first order. Data sheets are on our specifications page. Request a quote or call 845-440-5220.
Commercial bag dispensers keep bag stock off the counter and within reach of the person who needs it. Wall mounting protects the roll from contamination, stops the pile of loose bags that builds up in every supply closet, and makes it obvious at a glance when a refill is due.
This collection holds general-purpose wall-mounted bag dispensers for exam rooms, labs, food prep areas and utility spaces, alongside the menstrual care disposal units we manufacture under our S.A.C. line. The bags and liners that load into them are stocked separately.
The clear-front bag dispensers we stock are made by Bowman, a US manufacturer we distribute. They are molded from PETG, a transparent rigid plastic, so staff can see remaining stock without opening anything.
Two-way keyholes on the back plate accept vertical or horizontal mounting, which matters when you are working around existing casework, a glove box holder or an outlet. The double unit measures 10.1 inches wide by 7.1 inches high by 3.95 inches deep and weighs just over a pound, so it mounts to drywall with standard anchors.
Eight configurations are stocked, priced between $30.00 and $120.00. Each carries a downloadable data sheet with item numbers and dimensions for submittal packages. Start with the single roll dispenser at $30.00 or the double at $59.00.
Single units hold one roll and suit low-turnover points such as a private office, a break room or a single exam bay. They also work as a second dispenser at a satellite location where a full double would sit half empty.
Double units hold two rolls. Load them with the same bag for longer intervals between refills, or with two sizes so staff can grab the right one without walking to a second station. In high-turnover rooms the double is usually the better buy, since the labor cost of a refill trip exceeds the price gap between the two.
Mount at working height near the point of use. A dispenser installed across the room from where bags get pulled will be ignored, and staff will go back to keeping a loose box on the counter. The same logic applies to glove dispensers and wipe dispensers mounted in the same rooms.
Bag dispensers are a small line item that quietly controls supply waste, which is why we included them in our roundup of essential janitorial supplies. In clinical and lab settings they also support the containment step covered in PPE waste segregation and containment.
Several products here belong to our S.A.C. menstrual disposal line, which we manufacture in the USA. These are stall-mounted units that hand users a sealed bag, and they take dedicated SB8836 boxes or SR9010 rolls.
If that is what you are specifying, our menstrual courtesy bag dispensers collection covers the formats in full, and the courtesy bags that load into them are stocked for standing orders. We made the case for in-stall bags in this breakdown of the maintenance math.
The clear roll dispensers take standard bag rolls sized to the unit, with single and double roll capacities. The S.A.C. menstrual units take dedicated SB8836 boxes or SR9010 rolls. Check the data sheet or send us your bag dimensions and we will confirm the fit against our trash bag and liner range.
Two-way keyhole slots on the back plate allow vertical or horizontal orientation on drywall, tile or casework with standard anchors. No plumbing or electrical work is involved, so a facilities tech can install a run of them in an afternoon.
The Bowman roll dispensers are built in the USA by Bowman, and our S.A.C. menstrual disposal units are manufactured by us in the USA. Country of origin appears on each product's data sheet for procurement files.
Yes. We ship case quantities, set up standing refill orders and support institutional and government purchasing. Send us room counts and we will size the first order. Data sheets are on our specifications page. Request a quote or call 845-440-5220.
You'll get the inside scoop on flash sales, new product releases and be entered in a contest for a year's worth of Fresh!
