Search

Commercial Waste Receptacles

These are Glaro all-metal commercial waste receptacles, a line we distribute, made to order for lobbies, corridors, hospitality floors and other indoor spaces where the unit stays in view. Every one is Made in the USA. Capacities run 12, 15, 16, 23, 24, 29, 33 and 41 gallons.

Specifiers come to this collection for two reasons. The first is finish, because a satin brass or satin aluminum body reads as part of the architecture. The second is footprint, since the half round units mount to a wall and give back floor area in a corridor.

Every unit here is heavy-gauge galvanized steel with a baked powder-coat or hand-spun metal finish. Outdoor and open-top formats sit in our wider Glaro waste receptacle range.

Wall Mounted and Half Round Waste Receptacles

A half round trash can sits flat against a wall and occupies roughly half the floor area of a round unit of the same capacity. That matters in corridors, elevator lobbies and any route a floor scrubber has to clear.

The Glaro Profile series is the half round line in this collection. The 18" units carry a hinged lid in satin brass or satin aluminum and ship with a plastic inner liner. The 24" units hold 24 and 29 gallons and are wall-mountable.

A wall mounted trash can needs the optional mounting bracket, which fits any half round receptacle and is sold separately. Mounting the unit off the floor also removes the base as a cleaning obstacle, which is why we see these specified in healthcare corridors.

Decorative Metal Finishes for Front-of-House Spaces

Decorative trash cans in a commercial setting have to survive daily service and still look intentional beside the furniture. The finish options are what separate these from back-of-house bins.

  • Satin brass. Hand-spun and satin polished, then sealed with a clear powder coat. Used on the Mount Everest and Atlantis covers in this collection.
  • Satin aluminum. A cooler, more neutral metal finish that suits contemporary interiors and reads well against glass and pale stone.
  • Designer powder-coat colours. 27 textured and smooth body finishes, including vein and marble effects, so the base can match an existing palette.

Hotel trash cans and lobby trash can placements usually take the covered formats, because an open top puts contents in the sightline of everyone crossing the space. Pair the finish to the fixtures already in the room and the unit stops reading as equipment.

Lid and Opening Types

The opening decides how the receptacle behaves in service. Four formats appear across this collection.

  • Tip-action. Self-closing and centre-weighted, returning to centre after each use. It contains odors, reduces fire risk and keeps waste out of view.
  • Funnel top. A tapered opening that hides contents and guides waste into the liner. Used on the Atlantis and WasteMaster Value units here.
  • Large opening. The RecyclePro Value waste format, 15 to 41 gallons, for higher-volume indoor waste receptacles.
  • Hinged lid. The Profile half round format, which opens for servicing and closes flat against the wall.

For a fuller walkthrough of matching format to environment, our guide to choosing a commercial waste receptacle covers the specification sequence. The wall-mounted and free-standing comparison is worth reading before you commit to brackets.

All-Metal Construction and Liner Cans

Bodies are formed from heavy-gauge galvanized steel and finished in high-temperature baked powder coat. The construction resists corrosion, rust and fire, and a sealed non-rusting aluminum bottom protects the floor underneath.

Glaro manufactures these with 30% recycled content, and the receptacles are fully recyclable at end of life. That gives procurement something concrete to report against a sustainability commitment.

Liner arrangements vary by model. The Atlantis and Profile units in this collection include a plastic inner liner. The WasteMaster Value and RecyclePro Value units list the inner liner separately, so add Glaro receptacle liners or the optional plastic liner cans to the order.

Removable liner cans have a hand grip, so custodial staff lift the liner out and the finished body stays in place with no bag contact. Standard commercial trash bags sized to the liner work for everything else.

Specifying and Ordering

These are custom manufactured to the finish and size you select, with a 14 business day lead time on most Glaro units. Orders become non-cancelable once accepted, so confirm finish codes before you submit.

We sell direct as a manufacturer and distributor. Quantity pricing runs through the Quantity Discount Request on each product page, which is the route for multi-floor and multi-site rollouts.

Domestic manufacture matters on public and institutional contracts. Because Glaro produces these units in the USA, they suit procurement running under domestic sourcing requirements, which we cover in our note on the Buy American Act and facility purchasing.

Facilities specifying these often pair them with recycling receptacles for mixed streams and office trash cans and recycling bins for workstation and breakroom placements. Request a quote for bulk and multi-location orders.

Frequently Asked Questions

What is a waste receptacle?

A waste receptacle is a container for collecting refuse in a building or public space. In commercial specification the term means a durable freestanding or wall-mounted unit with a fixed metal body and a removable inner liner sized to it.

What is the difference between a waste receptacle and a trash can?

The terms overlap in everyday use. Architects and facility specifiers say waste receptacle when they mean a permanent, finished unit selected for a specific space. Commercial trash receptacles in that sense are chosen on capacity, opening format and finish together.

Can commercial waste receptacles be wall mounted?

Half round models can. The Glaro Profile 18" and 24" units accept an optional wall mounting bracket that carries the receptacle off the floor. Round and funnel-top units in this collection are freestanding.

What size waste receptacle do I need?

Match capacity to traffic and service frequency. Corridors and guest areas are usually specified at 12 to 24 gallons, while lobbies, cafeterias and other high-traffic points run 29 to 41 gallons. Size up one step where servicing happens less than daily.

Do these receptacles come with liners?

It depends on the series. Atlantis and Profile units include a plastic inner liner. WasteMaster Value and RecyclePro Value units list the liner separately, and plastic liner cans are available for any Glaro receptacle.

These are Glaro all-metal commercial waste receptacles, a line we distribute, made to order for lobbies, corridors, hospitality floors and other indoor spaces where the unit stays in view. Every one is Made in the USA. Capacities run 12, 15, 16, 23, 24, 29, 33 and 41 gallons.

Specifiers come to this collection for two reasons. The first is finish, because a satin brass or satin aluminum body reads as part of the architecture. The second is footprint, since the half round units mount to a wall and give back floor area in a corridor.

Every unit here is heavy-gauge galvanized steel with a baked powder-coat or hand-spun metal finish. Outdoor and open-top formats sit in our wider Glaro waste receptacle range.

Wall Mounted and Half Round Waste Receptacles

A half round trash can sits flat against a wall and occupies roughly half the floor area of a round unit of the same capacity. That matters in corridors, elevator lobbies and any route a floor scrubber has to clear.

The Glaro Profile series is the half round line in this collection. The 18" units carry a hinged lid in satin brass or satin aluminum and ship with a plastic inner liner. The 24" units hold 24 and 29 gallons and are wall-mountable.

A wall mounted trash can needs the optional mounting bracket, which fits any half round receptacle and is sold separately. Mounting the unit off the floor also removes the base as a cleaning obstacle, which is why we see these specified in healthcare corridors.

Decorative Metal Finishes for Front-of-House Spaces

Decorative trash cans in a commercial setting have to survive daily service and still look intentional beside the furniture. The finish options are what separate these from back-of-house bins.

  • Satin brass. Hand-spun and satin polished, then sealed with a clear powder coat. Used on the Mount Everest and Atlantis covers in this collection.
  • Satin aluminum. A cooler, more neutral metal finish that suits contemporary interiors and reads well against glass and pale stone.
  • Designer powder-coat colours. 27 textured and smooth body finishes, including vein and marble effects, so the base can match an existing palette.

Hotel trash cans and lobby trash can placements usually take the covered formats, because an open top puts contents in the sightline of everyone crossing the space. Pair the finish to the fixtures already in the room and the unit stops reading as equipment.

Lid and Opening Types

The opening decides how the receptacle behaves in service. Four formats appear across this collection.

  • Tip-action. Self-closing and centre-weighted, returning to centre after each use. It contains odors, reduces fire risk and keeps waste out of view.
  • Funnel top. A tapered opening that hides contents and guides waste into the liner. Used on the Atlantis and WasteMaster Value units here.
  • Large opening. The RecyclePro Value waste format, 15 to 41 gallons, for higher-volume indoor waste receptacles.
  • Hinged lid. The Profile half round format, which opens for servicing and closes flat against the wall.

For a fuller walkthrough of matching format to environment, our guide to choosing a commercial waste receptacle covers the specification sequence. The wall-mounted and free-standing comparison is worth reading before you commit to brackets.

All-Metal Construction and Liner Cans

Bodies are formed from heavy-gauge galvanized steel and finished in high-temperature baked powder coat. The construction resists corrosion, rust and fire, and a sealed non-rusting aluminum bottom protects the floor underneath.

Glaro manufactures these with 30% recycled content, and the receptacles are fully recyclable at end of life. That gives procurement something concrete to report against a sustainability commitment.

Liner arrangements vary by model. The Atlantis and Profile units in this collection include a plastic inner liner. The WasteMaster Value and RecyclePro Value units list the inner liner separately, so add Glaro receptacle liners or the optional plastic liner cans to the order.

Removable liner cans have a hand grip, so custodial staff lift the liner out and the finished body stays in place with no bag contact. Standard commercial trash bags sized to the liner work for everything else.

Specifying and Ordering

These are custom manufactured to the finish and size you select, with a 14 business day lead time on most Glaro units. Orders become non-cancelable once accepted, so confirm finish codes before you submit.

We sell direct as a manufacturer and distributor. Quantity pricing runs through the Quantity Discount Request on each product page, which is the route for multi-floor and multi-site rollouts.

Domestic manufacture matters on public and institutional contracts. Because Glaro produces these units in the USA, they suit procurement running under domestic sourcing requirements, which we cover in our note on the Buy American Act and facility purchasing.

Facilities specifying these often pair them with recycling receptacles for mixed streams and office trash cans and recycling bins for workstation and breakroom placements. Request a quote for bulk and multi-location orders.

Frequently Asked Questions

What is a waste receptacle?

A waste receptacle is a container for collecting refuse in a building or public space. In commercial specification the term means a durable freestanding or wall-mounted unit with a fixed metal body and a removable inner liner sized to it.

What is the difference between a waste receptacle and a trash can?

The terms overlap in everyday use. Architects and facility specifiers say waste receptacle when they mean a permanent, finished unit selected for a specific space. Commercial trash receptacles in that sense are chosen on capacity, opening format and finish together.

Can commercial waste receptacles be wall mounted?

Half round models can. The Glaro Profile 18" and 24" units accept an optional wall mounting bracket that carries the receptacle off the floor. Round and funnel-top units in this collection are freestanding.

What size waste receptacle do I need?

Match capacity to traffic and service frequency. Corridors and guest areas are usually specified at 12 to 24 gallons, while lobbies, cafeterias and other high-traffic points run 29 to 41 gallons. Size up one step where servicing happens less than daily.

Do these receptacles come with liners?

It depends on the series. Atlantis and Profile units include a plastic inner liner. WasteMaster Value and RecyclePro Value units list the liner separately, and plastic liner cans are available for any Glaro receptacle.

Search